Hykee Replock Installation in Leeds

If you would like a Hykee Lock installing on your van just give us a ring!

Hykee Replock Installation Van thefts have been on the rise in recent years, with thieves increasingly targeting commercial vehicles for their valuable contents. If you use your van for work or store expensive tools and equipment inside, it’s essential to take security seriously. One effective way to deter thieves is by installing a Hykee Replock.

The Hykee Replock is a high-security replacement lock that fits onto the existing door handle of your van, making it almost impossible for a thief to pick or bump open. Unlike standard locks, which can be easily bypassed by experienced criminals, the Hykee Replock includes a unique anti-pick cylinder and hardened steel bolt that provides maximum protection against forced entry attempts. The installation process is quick and easy, taking less than an hour in most cases.

Tools Needed

Step 1: Prepare Door

Unlock the door and remove the existing round keyhole cover plate. You’ll need to remove the screw that holds it in place. Step 2: Install Hykee Replock Turn the door handle upside-down and slide the lock cover into place.

Step 2: Attach Replock

Sensor Install the sensor to the door by sliding it into place. There s a self-adhesive strip on the back of the sensor, so it will stick to most doors.

Step 3: Install Lock Body

Guide the short arm of the lock body into place. Slide the longer arm into position and tighten the screws to secure it in place. Step 4: Install Lock Body Cover Secure the cover plate by tightening a screw, then press the locking pin into place.

Step 4: Secure with Bolts

Thread the bolts onto the lock body and slide the lock into place. Just tighten enough to secure the lock in place. Step 5: Install Handle To install a new handle, simply thread it into place. Tighten by hand until snug, then use a wrench to finish tightening.

Step 5: Test and Finalize

Your Lock Test the lock to ensure it’s secure, then replace the door and test again. You’re done! If your deadbolt lock is no longer working or you’re having problems with it, you may need to replace it.

What is a Hykee Replock and how does it work?

A Hykee Replock Installation is a high-security lock designed to replace the vulnerable factory lock on certain models of commercial vehicles, such as the Ford Transit, Fiat Ducato, and Peugeot Boxer. The Replock is more resistant to theft than the factory lock and provides increased security and peace of mind for vehicle owners. The Hykee Replock works by replacing the existing lock with a new lock that is more difficult to bypass or break.

The Replock is designed with anti-drill and anti-pick features, making it more difficult for thieves to gain entry to the vehicle. Additionally, the Hykee Replock can be keyed to match the vehicle’s existing locks, allowing for seamless integration and convenience for the owner. Overall, the Hykee Replock is a high-quality security solution for commercial vehicle owners looking to protect their assets.

What are the benefits of installing a Hykee Replock Installation on your vehicle?

There are several benefits of installing a Hykee Replock on your commercial vehicle, including:

Increased security: The Hykee Replock is designed to be highly resistant to theft, making it much more difficult for criminals to gain access to your vehicle.
Peace of mind: Knowing that your vehicle is secure can provide you with greater peace of mind, especially if you frequently transport valuable or sensitive cargo.
Convenience: The Hykee Replock can be keyed to match your existing vehicle locks, so you won’t need to carry additional keys or worry about having different keys for different locks.
Easy installation: The Replock can be installed quickly and easily, usually in less than an hour, which means you can get back to using your vehicle as soon as possible.
Cost-effective: Compared to the cost of replacing a stolen vehicle or lost cargo, the cost of installing a Hykee Replock is relatively low, making it a cost-effective security solution.

Ford Hykee Replocks | Hykee TVL Driver & Door Lock Upgrades (garrisonlocks.co.uk)

Overall, the benefits of installing a Hykee Replock are significant, providing increased security, convenience, and peace of mind for commercial vehicle owners.

Can a Hykee Replock Installation be installed on any type of vehicle?

No, a Hykee Replock is designed specifically for certain models of commercial vehicles, such as the Ford Transit, Fiat Ducato, and Peugeot Boxer. These vehicles are often targeted by thieves due to their popularity and the value of the cargo they carry, which is why the Hykee Replock was developed as a high-security solution for these vehicles. It’s important to ensure that you have the correct model of Replock for your vehicle, and that it is installed properly by a professional to ensure maximum security and effectiveness.

How difficult is it to install a Hykee Replock Installation?

The installation process for a Hykee Replock can vary depending on the specific make and model of your vehicle, as well as the type of lock being installed. However, in general, the installation process is relatively straightforward and can usually be completed in less than an hour by a professional installer.

The installation process typically involves removing the existing factory lock and replacing it with the Hykee Replock. The new lock is designed to fit seamlessly into the existing lock housing, so there is no need for any additional modifications to the vehicle. The Replock is then secured in place using bolts or screws, and the locking mechanism is adjusted to ensure proper operation.

While it is possible for a DIY enthusiast to install a Hykee Replock, it is recommended that the installation be carried out by a professional installer to ensure that the lock is installed correctly and that the vehicle’s warranty is not voided. Additionally, a professional installer will be able to provide advice on the best placement for the lock to ensure maximum security and effectiveness.

What tools are required for Hykee Replock installation?

The tools required for Hykee Replock installation can vary depending on the specific make and model of your vehicle, as well as the type of lock being installed. However, in general, the following tools may be required:

Socket set: A socket set is typically required to remove the existing factory lock and install the new Replock.
Screwdrivers: Depending on the type of lock being installed, various types of screwdrivers may be required, including Phillips, flathead, or torx drivers.
Drill: If the Replock requires drilling for installation, a power drill and appropriate drill bits will be necessary.
Measuring tape: To ensure that the lock is properly aligned and positioned, a measuring tape may be needed.
Pliers: Pliers can be useful for holding and positioning parts during installation.
Wire cutters: Wire cutters may be required to cut any existing wires or cables during the installation process.
Lubricant: A lubricant may be required to ensure smooth operation of the locking mechanism.

It’s important to ensure that you have all the necessary tools before attempting to install a Hykee Replock, and to follow the manufacturer’s instructions and any safety precautions to ensure that the installation is carried out safely and effectively.

How long does it typically take to install a Hykee Replock?

The installation time for a Hykee Replock can vary depending on the specific make and model of your vehicle, as well as the type of lock being installed. However, in general, the installation process can usually be completed in less than an hour by a professional installer.

If the installer has experience with the specific vehicle and type of lock being installed, the installation may be completed more quickly. However, if any unforeseen issues arise during the installation process, such as difficulty removing the existing lock or issues with the fit of the Replock, it may take longer to complete the installation.

It’s important to ensure that the installation is carried out correctly to ensure maximum security and effectiveness of the lock. This may involve additional time for testing and adjustment of the lock to ensure proper operation.

What is the cost of Hykee Replock installation?

The cost of Hykee Replock installation can vary depending on several factors, including the specific make and model of your vehicle, the type of Replock being installed, and the location and experience of the installer. In general, the cost of installation can range from $200 to $500 or more.

It’s important to ensure that you choose a reputable installer with experience installing Hykee Replocks and other high-security locks to ensure that the installation is carried out correctly. While it may be tempting to opt for a cheaper installation service, it’s important to remember that the quality of the installation can impact the effectiveness of the lock in preventing theft and unauthorized access to your vehicle.

Additionally, it’s important to factor in the cost of the Replock itself, which can range from 150 to 300 or more depending on the specific model and any additional features included. Overall, the cost of Hykee Replock installation can be a significant investment, but can provide valuable peace of mind and protection for your commercial vehicle and its contents.

Are there any precautions that need to be taken during the installation process?

Yes, there are several precautions that should be taken during the installation process of a Hykee Replock to ensure the safety of the installer and the effectiveness of the lock. Some of these precautions include:

Ensure that the vehicle is parked on a level surface and the parking brake is engaged to prevent any accidental movement of the vehicle during installation.
Wear appropriate safety gear, such as gloves and safety glasses, to protect against any potential injuries during the installation process.
Disconnect the battery to prevent any electrical damage to the vehicle during installation.
Follow the manufacturer’s instructions and any safety precautions carefully to ensure that the installation is carried out correctly and safely.
If using a power drill, take care to avoid damaging any existing wires or components within the vehicle.
Test the lock several times after installation to ensure that it is functioning correctly and that all wiring and components are properly connected.
If you are unsure about any aspect of the installation process, it’s recommended to seek the assistance of a professional installer with experience installing Hykee Replocks and other high-security locks.

By taking these precautions during the installation process, you can ensure that the Hykee Replock is installed safely and correctly, providing maximum security and protection for your commercial vehicle and its contents.

How do you know if a Hykee Replock is compatible with your vehicle?

Hykee Replocks are designed to be compatible with a wide range of commercial vehicles, but it’s important to ensure that the specific lock model you are considering is compatible with your particular make and model of vehicle before purchasing and attempting to install the lock. Here are some ways to determine if a Hykee Replock is compatible with your vehicle:

Check the manufacturer’s specifications: The manufacturer of the Hykee Replock should provide a list of compatible vehicle makes and models for each lock model. Check the specifications for the lock you are considering to ensure that it is compatible with your vehicle Hykee Replock Installation Hykee Replock Installation Hykee Replock Installation
Consult with a professional installer: A professional installer with experience installing Hykee Replocks may be able to advise you on whether a particular lock model is compatible with your specific make and model of vehicle.
Contact the manufacturer: If you are unsure whether a Hykee Replock is compatible with your vehicle, you can contact the manufacturer directly for assistance. They may be able to provide guidance or recommend a compatible lock model for your specific vehicle.

By taking these steps to ensure compatibility before purchasing and attempting to install a Hykee Replock, you can save time and avoid potential issues with the installation process.

Can a Hykee Replock be installed in addition to an existing locking mechanism, or does it replace it?

A Hykee Replock is designed to be installed in addition to the existing locking mechanism of a commercial vehicle, rather than replacing it. The Hykee Replock is typically installed on the existing door lock, providing an additional layer of security to prevent tampering and theft.

The installation process typically involves removing the existing lock cylinder from the door and replacing it with the Hykee Replock cylinder. The Hykee Replock cylinder is then connected to an electronic control module, which can be programmed to operate using the vehicle’s existing remote locking system.

Once installed, the Hykee Replock can be used in conjunction with the existing locking mechanism, providing an additional layer of security to prevent theft and unauthorized access to the vehicle.

By installing a Hykee Replock in addition to the existing locking mechanism, you can improve the security of your commercial vehicle without having to remove or replace the existing lock.

What is the warranty on a Hykee Replock?

The specific warranty for a Hykee Replock may vary depending on the manufacturer and the model of the lock. However, in general, Hykee Replocks typically come with a limited warranty that covers defects in materials and workmanship for a specific period of time after the date of purchase.

The length and terms of the warranty may vary, but it is common for Hykee Replocks to come with a warranty period of one to two years from the date of purchase. The warranty typically covers the cost of repairing or replacing the lock if it is found to be defective due to a manufacturing defect or faulty materials.

It’s important to review the specific warranty terms and conditions before purchasing a Hykee Replock, as the warranty may vary depending on the manufacturer and model of the lock. Additionally, some manufacturers may offer extended warranty options or additional coverage for an additional fee.